Made of melamine.
On a stable wide foot.
Dishwasher safe.

The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R134.
Daily output: 18 kg.
Ice bin capacity: 10-11 kg.
Dimensions: 400×400×(H)650 mm.
Power/voltage: 180 W/230 V.
Net/gross weight: 28/30 kg.

Very easy in use, cleaning, maintenance and even servicing
.
Perfect for washing plates, cutlery, glasses, mugs, trays
.
Electromechanical controls.

Housing made of stainless steel AISI 304
.
Separate spray arms for washing (plastic) and rinsing (stainless steel
).
Fixed washing arms at the top, rotating stainless steel rinsing arms
.
Solid double-skin door
.
Washing cycles number/duration: 1/120 s.

Capacity: up to 30 baskets/h.

Water consumption per cycle: 2-2,5 l (depending on water pressure)
.
Washing water temperature: 62°C, rinse water temperature: 85°C
.
Boiler (capacity/power): 6 l/3 kW for 230V and 6 kW for 400V
.
Tank (capacity/power): 35 l/3,6 kW.

Pump power: 0,75 HP.

Safety thermostat for boiler/for tank up to 105°C/99°C
.
Analog water thermometer for boiler.

IP44 protection class.

Weight: 57 kg
.
EQUIPMENT:
 1x universal baskets 500x500x(H)105 mm for glasses
, 1x basket with pins 500x500x(H)105 mm for plates
, 1x cutlery basket 110x110x(H)130 mm
, water supply hose length 1,5 m with connection 3/4” inner thread
, drain hose length 2 m Ø 25 mm
, power cord without plug, 
rinse aid dispenser
, adjusted for detergent pump installation (screw in tank rear wall). Vertically adjustable legs: ±10 mm, Ø 40 mm.

Designed for efficient transport of hot or cold food.
Maintains the right temperature for more than 4 hours.
Durable, solid polyethylene housing resistant to mechanical damage.
Thick foam insulation.
2 compartments for containers.
Ergonomic handles.
Full width swing door for easy loading of the container.
Built-in seal and wide nylon snaps for airtight seal of the carrier.
Ventilation valve helps to maintain the right moisture level inside the insulated carrier.
4 castors – 2 fixed and 2 swivel (1 brake) for easy manoeuvring.
Impact-absorbing elements.
Easy cleaning.
Internal chamber dimensions: 330x545x485 mm.
CAUTION: Putting food with temperature above 121°C inside the carrier may damage the item.
CAUTION: The containers should be placed only on the guides.

Chamber dimensions: 800x480x(H)580 mm.
2 shelves (390x428 mm) included.
Spread load capacity of 15 kg each.
Energy label: C (A+++-G).
Weight: 71 kg.