Sink unit with base shelf 1,4 m - 2 sink in center L 50 x B 50 x T 30 cm
Dimensions: 1400x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 600 x 500 x 300 mm.
The dimensions of the drain are Ø 50 mm.
| Net weight, kg | 49 |
| Product dimensions | 1400 x 700 x 970 mm |
Bolted framework
Sink bowls and worktop made of AISI 304 acid resistant stainless steel
Formed chamber
Body and framework made of AISI 430, dimensions: 40x40 mm
Sink bowl: 400x400x(H)250 mm
Bottom opening for air trap: Ø 50 mm
Worktop opening: 10 mm
Bowls covered by a masking frame (if any)
Shelf 160 mm above the floor
Wall edge: 40 mm
Adjustable feet: +25/-5 mm
Approximate permitted worktop and shelf load: 70 kg/m2
Tap opening: Ø 35 mm
493,70 €
Sink bowls pressed from a single sheet of stainless steel characterised by high resistance to food acids and chemicals
Sink bowl seamlessly welded into the stainless steel worktop.
Sink dimensions: 400x400x(H)250 mm.
All the remaining elements made of AISI 430 steel.
Drain compatible with standard traps: ø52 mm.
Worktop with 19 mm recess to prevent water from flowing in.
Available in right-hand and left-hand versions.
Screwed.
Feet made of 40x40 mm profiles.
Approximate maximum load per worktop – 70 kg/m².
Adjustable feet – 25 mm upwards or 5 mm downwards.
540,30 €
Sink bowls pressed from a single sheet of stainless steel characterised by high resistance to food acids and chemicals
Sink bowl seamlessly welded into the stainless steel worktop.
Sink dimensions: 400x400x(H)250 mm.
All the remaining elements made of AISI 430 steel.
Drain compatible with standard traps: ø52 mm.
Worktop with 19 mm recess to prevent water from flowing in.
Available in right-hand and left-hand versions.
Screwed.
Feet made of 40x40 mm profiles.
Approximate maximum load per worktop – 70 kg/m².
Adjustable feet – 25 mm upwards or 5 mm downwards.
540,30 €
Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0 mm thick stainless sheet material.
A basket groove in the work surface and an interface for a dishwasher at one end.
The roller track consists of machine-washable modules.
Drainage with strainer in the sink.
Dimensions: 1600x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 500 x 300 mm.
The dimensions of the drain are Ø 50 mm.
