SARO Pizza preparation table with glass top model ES 903 PZ
Material: (housing and interior) stainless steel; (worktop with upstand) granite.
3 doors.
3 height-adjustable grids and 3 sets of support rails.
Digital temperature control (DIXELL).
Evaporator foamed on 3 sides.
Static cooling with circulating air fan.
Automatic defrost.
Suitable for ambient temperatures from approx.
16 to 38 °C.
Temp.
+2 / +8 °C.
Connection: 230 V - 50 Hz - 0.280 kW.
Grids: 3x W 333 x D 530 mm.
Capacity (gross/net): 368/297 liters.
External dimensions: W 1400 x D 700 x H 866/1016 mm.
4 wheels, 2 lockable.
Weight: 170kg.
Refrigerant: R290.
Energy efficiency class: E (spectrum A+++ to E).
| Net weight, kg | 204 |
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 7x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.
A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The rear edge of the worktop has a raised cold recess section 1/6 For GN containers.
The cold cavity holds 7x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.
A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Ten drawers can accommodate 8x (GN1/1 100) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section 1/6 For GN containers.
The cold cavity holds 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.
Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Four drawers can hold 3x (GN1/1 150) and 1x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side of the refrigerator as standard.
If necessary, the cabinet position can be changed (please specify when ordering).
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify on request).
The worktop has milled edges, it is also possible to order cabinets with birch wood or stone worktops (please specify when ordering).
Pizza worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
One drawer can hold one (GN1/1 200) GN container.
The drawer opens 110% so that GN containers are easy to place in the drawer.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
Both cabinets have 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides for the cabinets (please specify when ordering).
The worktop has floured edges, and it is also possible to order cabinets with a birch wood or stone worktop (please specify when ordering).
