Pre wash table with roller tracks and shelf 155x65
Stainless steel pre-wash table with roller track.
Work surface (sink) made of 1.0 mm thick stainless sheet material.
A basket groove in the work surface and an interface for a dishwasher at one end.
The roller track consists of machine-washable modules.
In the sink, a waste strainer and a shut-off valve 1½ ″.
Legs from stainless square tube (30×30mm).
Insoles with adjustable height on the feet (+/- 25mm).
The shelf consists of removable modules with a width of 103 mm.
NB! Specify on the order:
It is possible to order with a back edge (60mm).
It is possible to order a pre-wash shower with openings (2x Ø 25mm).
Dishwasher interface location (left or right).
Product dimensions | 1550x650x900mm |
Prevents grease from blocking the sewer system.
For indoor use (dishwashing areas, kitchens).
Compact size, completely made from stainless steel.
The gasketed lid secured in place with four clamps.
Water in & out connections Ø50 mm.
Two vertical interior baffles separating grease and silt.
Grease removal drain fitted with a ball valve.
340,00 €
Sink bowls pressed from a single sheet of stainless steel characterised by high resistance to food acids and chemicals
Sink bowl seamlessly welded into the stainless steel worktop.
Sink dimensions: 400x400x(H)250 mm.
All the remaining elements made of AISI 430 steel.
Drain compatible with standard traps: ø52 mm.
Worktop with 19 mm recess to prevent water from flowing in.
Available in right-hand and left-hand versions.
Screwed.
Feet made of 40x40 mm profiles.
Approximate maximum load per worktop – 70 kg/m².
Adjustable feet – 25 mm upwards or 5 mm downwards.
540,30 €
Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0 mm thick stainless sheet material.
A basket groove in the work surface and an interface for a dishwasher at one end.
The roller track consists of machine-washable modules.
Drainage with strainer in the sink.
Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0 mm thick stainless sheet material.
A basket groove in the work surface and an interface for a dishwasher at one end.
The roller track consists of machine-washable modules.
Drainage with strainer in the sink.
Dimensions: 1200x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 500 x 300 mm.
The dimensions of the drain are Ø 50 mm.