Made of stainless steel with a polished finish.
Embellished rim with embossed decorative patterns.
Dishwasher safe.
Suitable for the HENDI Cooling tray (code: 424186).

Made of durable stainless steel (AISI 430).
Fitted with 2, non adjustable, removable shelves and 2 fixed shelves (bottom and middle shelf).
Equipped with 8 sliding doors with vertical handle, all on roller bearings.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
Flat pack delivery, needs assembly.

Housing and interior of the chamber made of stainless steel.
Chamber fitted with a ceramic floor.
Easy to read touch control panel with push buttons and digital display that shows time and power.
Lower and upper rotating microwave antennas for uniform energy distribution, no rotating parts in the chamber.
Built-in air and grease filter to protect against external factors.
A special system that reminds you to clean the filter.
Door with large window for observing processes in the illuminated microwave chamber.
Tight latch closure; easy opening – no locking mechanism.
Chamber interior:
– dimensions 330x310x(H)175, capacity 18 l.
– easy to clean.
– no breaking of plates thanks to appropriately rounded edges.
– ceramic floor.
Multifunctional use:
– defrosting.
– 10 default programs.
– 10 power levels.
– upload programs via the USB port,
– possibility to save up to 100 programs, including up to 20 custom, multistage programs.
– automatic time conversion for double or triple portions.
– the end of the program is signalled by an alarm. Possibility to change the sound or turn it off completely.
Microwave power: 3000 W.
Suitable for round (up to ø300 mm) and rectangular plates.
Maximum single operating time: 60 minutes.
Fitted with a grounded plug.
Comes with a USB card, software included.
Weight: 31.8 kg.

The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R134.
Daily output: 18 kg.
Ice bin capacity: 10-11 kg.
Dimensions: 400×400×(H)650 mm.
Power/voltage: 180 W/230 V.
Net/gross weight: 28/30 kg.

Worktop made of AISI 304 stainless steel
Side panel made of AISI 430 stainless steel
Cabinet closed on 3 sides, internal dimensions: 798x570x(H)470 mm
Cast iron heaters: 4x ø220 mm, 2.6 kW each
Steel, adjustable feet, 100-165 mm
Weight: 65 kg