Made of stainless steel with a polished finish.
Embellished rim with embossed decorative patterns.
Dishwasher safe.
Suitable for the HENDI Cooling tray (code: 424186).

Housing and interior of the chamber made of stainless steel.
Chamber fitted with a ceramic floor.
Lower and upper rotating microwave antennas for uniform energy distribution, no rotating parts in the chamber.
Built-in air filter protects against dust and dirt.
Easy to read control panel, select the desired program on the touch panel.
Door with large window for observing processes in the illuminated microwave chamber.
Tight latch closure; easy opening – no locking mechanism.
Chamber interior:
– dimensions 360x409x(H)225 mm, capacity 34 l.
– easy to clean.
– no breaking of plates thanks to appropriately rounded edges.
– ceramic bottom.
Multifunctional use:
– defrosting.
– 10 default programs.
– possibility to save up to 100 programs (up to 3 stages per program).
– automatic time conversion for double portions.
– the end of the cooking cycle is signalled by an acoustic alarm.
Microwave power: 3000 W.
Suitable for round (up to ø355 mm) and rectangular plates.
Maximum single operating time: 60 minutes.
Fitted with a grounded plug.
Weight: 32.3 kg.

Very easy in use, cleaning, maintenance and even servicing.
Perfect for washing mugs, cups, glasses, cutlery, plates.
Electronic controls.
Housing made of stainless steel AISI 304.
Separate stainless steel washing and rinsing arms.
Solid double-skin door.
Safety thermostat for boiler/for tank up to: 105°C/99°C.
Electronic water thermometer for boiler and tank.
Sealing factor of the pump: IP 44
ø40 mm feet, ±10 mm in height adjustable

FUNCTIONS:
Dishwasher chamber cleaning program.
“SOFT START” function: water pump is started at lower pressure to gradually increase pressure to avoid damaging fragile dishes.
Cold rinse function - ideal for glass washing.

BENEFITS OF COLD RINSE:
Cools down the glasses after cleaning, making them ready for use immediately.
Removes the smell of rinse aid, ideal for wine glasses.

EQUIPMENT:
1x universal basket 400x400x(H)150 mm for glasses.
1x basket with pins 400x400x(H)150 mm for plates.
1x cutlery basket 110x110x(H)130 mm.
Water supply hose length 1,5 m, with connection 3/4” inner thread.
Drain hose length 1,5 m, Ø24 mm
Power cord without plug.

The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R454c.
Daily output: 40 kg.
Ice bin capacity: 16-18 kg.
Dimensions: 480×580×(H)750 mm.
Power/voltage: 455 W/230 V.
Net/gross weight: 44/47 kg.

Chamber dimensions: 822x570(H)580 mm.
2 shelves (330x545 mm) included.
Spread load capacity of 40 kg each.
Coolant: R290.
Energy label: C (A+++-G).
Weight: 95 kg.