To increase the capacity of 707906 and 707968 catering containers.
Dedicated groove makes it easy to place on container and covers the container with a lid.
Ultralight, high-resistance to temperature.
707012 frame extends the container to fit cutlery or ladles.
Fits HENDI 707821 cooling element thus extending the low temperature period while in transport.
Helps align the upper edges of GN trays of different heights - ideal when the containers are used as bain-maries or refrigerating tanks.
707029 frame boosts the capacity of the entire set, thanks to the option of hanging a second layer of GN containers with height of up to (H)150 mm.

Stainless steel body.

Polished surface finish.

Removable ashtray placed over the bin for easy cleaning and emptying of the bin.

Bin opening Ø 135 mm.

Anti-slip, rubber bottom to enhance bin stability and protect the floor against scratching.

Extremely easy to use, to clean and to service
Ideal for washing plates, cutlery, glassware, cups, trays, GN 1/1 containers
Electronic control
Detergent and rinse aid dispensers and drain pump as standard
Maximum height of washed plates 400 mm
Maximum height of glass to be cleaned 395 mm
Touch electronic control panel
AISI 304 stainless steel housing
Stainless steel upper and lower washing and rinsing arms
Lifting of the hood facilitated by built-in springs
Washing water temperature 60°C
Temperature of rinsing, scalding water 85°C
Boiler capacity and output 13.5 l / 7.5 kW
Tank capacity and power 68 l / 6.0 kW
Cleaning pump power 1,5 kM
Electronic water thermometers for the boiler and bath separately
Safety thermostat for boiler/bath up to 105°C / 99°C
Sealing factor of the pump: IP 44
Corner installation of dishwasher possible
Water connection: ¾"
Weight: 131.5 kg
Adjustable stainless steel feet from 100 to 150 mm

FUNCTIONS:
Three washing programs: 60, 120, 240 s
Dishwasher compartment washing programme
Possibility of a final rinse with cold water - especially useful when washing glass
„THERMO-PROTECTOR" system to prevent rinsing with cold water
8-point self-diagnostic system
„SOFT START" function to start the water pump at a lower pressure and raise it gradually so as not to damage delicate dishes
Door with microswitch for operation when hood is raised
ECO function - reduces power consumption when the device is not used for more than 15 minutes

EQUIPMENT:
1 universal glass basket 500x500x(H)105 mm
1 basket with pins for deep and shallow plates with 5x8 pcs, 500x500x(H)105 mm
1 cutlery basket 110x110x(H)130 mm
Rinse aid and detergent dispenser
Drain pump
Water hose 1.5 m long, with ¾" female thread connection.
Drain hose
Electric cable without plug

Housing made of ABS, with a fold-out stand, a hanging hole, and also a magnet to hang on metal surfaces.
3 alarm modes: quiet, moderate, loud.
After the set time:
– a red light flashes in each mode,
– in moderate and loud modes, the alarm goes off.
The light and sound alarm turn off automatically after 1 minute.
Max.
set time: 100 min.
with 10 sec.
accuracy.
2 functions: counting down (99-0 min.), counting up (0-99 min.).
Powered with 3x AAA batteries – not included.

2-ply, inside layer 60 µm food contact approved Polyethylene, outside layer 15µm Polyamide (Nylon).
Total thickness is 75 µm.

The used materials act as an UV filter.
Embossing improves the air flow out of the bag during the vacuum packing process.
Bags can be used in temperatures from -20˚ up to 100˚C.
Suitable for chamber and external vacuum packing machines.

Lid sold separately (1180062 or 1180063)