Very easy in use, cleaning, maintenance and even servicing..
Perfect for washing plates, cutlery, glasses, mugs, trays.
Electromechanical controls.Housing made of stainless steel AISI 304.
Separate spray arms for washing (plastic) and rinsing (stainless steel).
Fixed washing arms at the top, rotating stainless steel rinsing arms.
Solid double-skin door.
Washing cycles number/duration: 1/120 s.Capacity: up to 30 baskets/h.
Water consumption per cycle: 2-2,5 l (depending on water pressure).
Washing water temperature: 62°C, rinse water temperature: 85°C.
Boiler (capacity/power): 6 l/3 kW for 230V and 6 kW for 400V.
Tank (capacity/power): 35 l/2,8 kW.
Pump power: 0,75 HP.
Safety thermostat for boiler/for tank up to 105°C/99°C.
Analog water thermometer for boiler.
IP44 protection class.
Weight: 57 kg.

EQUIPMENT:
- 1x universal baskets 500x500x(H)105 mm for glasses
- 1x basket with pins 500x500x(H)105 mm for plates
- 1x cutlery basket 110x110x(H)130 mm
- water supply hose length 1,5 m with connection 3/4” inner thread
- drain hose length 2 m Ø 25 mm
- power cord without plug,
- rinse aid dispenser
Preparred for detergent pump installation (screw in tank rear wall).

Vertically adjustable legs: ≈10 mm, Ø 40 mm.

Splashback 40 mm high protecting the wall against stains.
Non-adjustable shelf – the distance from the floor to the lower edge of the shelf is 160 mm.
Approximate permissible shelf load: 70 kg/m².

Enables simultaneous blending of a batch of products of a maximum volume of approx.
80 litres or 60 eggs.
Stainless steel 420 mm long blending arm.
Max.
permissible immersion during operation: 370 mm
Adjustable speed of the mixing tip knife in the range of 1,500 – 12,000 rpm
Adjustable speed of the beater tip in the range of 200 – 1,800 rpm
Knife guard diameter: ø98 mm.

Device for production of meat products in small quantities
Made of AISI 304 stainless steel
Aluminium cast crank handle
Tilting trough for easier removal of the prepared stuffing
Double protection against accidental dislodging of the trough
Manual drive with removable crank handle
No gear system in the 282168 model, the number of crank revolutions equals the number of rotations of the stirrer in the bowl
Gear system in the model 282281, 3 revolutions of the crank equal one rotation of the stirrer in the bowl
The trough and the stirrer can be dismantled
Cover with handle part of set
Very easy to use and clean

Housing made of stainless steel, in black with a matte finish.

Stainless steel housing.

With ice cylinder cooling.

Removable container with non-drip tap.

Stable bottom plate with dripping tray.