Sink unit with base shelf 1,2 m - 2 sink in center L 50 x B 40 x T 25 cm
Dimensions: 1200x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 400 x 250 mm.
The dimensions of the drain are Ø 50 mm.
| Net weight, kg | 41 |
| Product dimensions | 1200 x 600 x 970 mm |
Prevents grease from blocking the sewer system.
For indoor use (dishwashing areas, kitchens).
Compact size, completely made from stainless steel.
The gasketed lid secured in place with four clamps.
Water in & out connections Ø50 mm.
Two vertical interior baffles separating grease and silt.
Grease removal drain fitted with a ball valve.
340,00 €
Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.
344,40 €
Prevents grease from blocking the sewer system.
For indoor use (dishwashing areas, kitchens).
Compact size, completely made from stainless steel.
The gasketed lid secured in place with four clamps.
Water in & out connections Ø50 mm.
Two vertical interior baffles separating grease and silt.
Grease removal drain fitted with a ball valve.
677,20 €
751,10 €
Stainless steel pre-wash table with roller track.
Work surface (sink) made of 1.0 mm thick stainless sheet material.
A basket groove in the work surface and an interface for a dishwasher at one end.
The roller track consists of machine-washable modules.
In the sink, a waste strainer and a shut-off valve 1½ ″.
Legs from stainless square tube (30×30mm).
Insoles with adjustable height on the feet (+/- 25mm).
The shelf consists of removable modules with a width of 103 mm.
NB! Specify on the order:
It is possible to order with a back edge (60mm).
It is possible to order a pre-wash shower with openings (2x Ø 25mm).
Dishwasher interface location (left or right).
