Insulated beverage dispenser with tap, HENDI, 18L, 230x420x(H)620mm
Brand:
Qty: 33
Delivery time: 5-10 workdays
Ideal for storage, transport and serving of hot and cold drinks.
Robust LDPE polyethylene housing.
Good polyurethane foam insulation.
4 heavy duty clamps, 25 mm wide, at either side of the jug, for easy and quick opening and closing.
Comfortable transport grips.
Tap distance from the floor: 95 mm.
Recessed tap - protection against transport damage.
Delivered with stickers for quick identification of drinks.
Vent for easier lid opening.
Shock and impact resistant.
Rounded chamber with grooves leading to the tap.
| Usable volume, L | 18 |
| Main material | plastic |
| Material | polyethylene terephthalate |
5-piece set:
Base made of ABS.
Tray made of stainless steel, with a profiled rim.
Transparent roll-top cover made of SAN, opened upwards up to 90°.
2 cooling elements.
NOTE: Before freezing, fill in the cooling element with water up to 90% of its volume.
Very easy in use, cleaning, maintenance and even servicing
.
Perfect for washing plates, cutlery, glasses, mugs, trays
.
Electromechanical controls.
Housing made of stainless steel AISI 304
.
Separate spray arms for washing (plastic) and rinsing (stainless steel
).
Fixed washing arms at the top, rotating stainless steel rinsing arms
.
Solid double-skin door
.
Washing cycles number/duration: 1/120 s.
Capacity: up to 30 baskets/h.
Water consumption per cycle: 2-2,5 l (depending on water pressure)
.
Washing water temperature: 62°C, rinse water temperature: 85°C
.
Boiler (capacity/power): 6 l/3 kW for 230V and 6 kW for 400V
.
Tank (capacity/power): 35 l/2,8 kW.
Pump power: 0,75 HP.
Safety thermostat for boiler/for tank up to 105°C/99°C
.
Analog water thermometer for boiler.
IP44 protection class.
Weight: 57 kg
.
EQUIPMENT:
1x universal baskets 500x500x(H)105 mm for glasses
, 1x basket with pins 500x500x(H)105 mm for plates
, 1x cutlery basket 110x110x(H)130 mm
, water supply hose length 1,5 m with connection 3/4” inner thread
, drain hose length 2 m Ø 25 mm
, power cord without plug,
rinse aid dispenser
, adjusted for detergent pump installation (screw in tank rear wall). Vertically adjustable legs: ±10 mm, Ø 40 mm.
Equipped with a large container for vegetables: 136 cm2.
Hole dimension: 180x87 mm.
Output: from 150 up to 450 kg/h.
Power/voltage: 550 W/400 V
Net weight: 21 kg.
The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R454c.
Daily output: 40 kg.
Ice bin capacity: 16-18 kg.
Dimensions: 480×580×(H)750 mm.
Power/voltage: 455 W/230 V.
Net/gross weight: 44/47 kg.
Small automatic and elegant coffee maker perfect for cafés, bars, restaurants or offices.
Easy-to-use mechanical water temperature control.
Boiler automatically refilled with water, built-in vibration pump.
Boiler capacity: 3 L, 1 boiling water nozzle, 1 steam nozzle.
Maximum cup height: 80 mm.
Weight: 30.5 kg.
