This drinks dispenser has a capacity of 24L in total between three 8L tanks. It allows you to serve large quantities of drinks to guests in places like hotels and restaurants. It's cooled efficiently using ice and also has a stainless steel center tube that can be filled with ice to keep drinks cold.

Very easy in use, cleaning, maintenance and even servicing.
Perfect for washing plates, cutlery, glasses, mugs, trays, GN containers.
Electromechanical controls.
Housing made of stainless steel AISI 304.
Separate stainless steel spray arms for washing and rinsing.
4 surface filters over tank water level.
Additional sieve in front of the pump inlet.
Built-in springs for easy hood lift.
Washing cycles number/duration: 1/120 s.
Capacity: up to 30 baskets/h.
Water consumption per cycle: 2-2,5 l (depending on water pressure).
Washing water temperature: 62°C, rinse water temperature: 85°C.
Boiler (capacity/power): 7,4 l/7,5 kW.Tank (capacity/power): 68 l/6,0 kW.
Pump power: 1,5 HP.
Safety thermostat for boiler/for tank up to 105°C/99°C.
Analog water thermometer for boiler and tank.
IP44 protection class.
Weight 111 kg.

EQUIPMENT:
- 1x universal basket 500x500x(H)105 mm for glasses
- 1x basket with pins 500x500x(H)105 mm for plates
- 1x cutlery basket 110x110x(H)130 mm
- Water supply hose length 1,5 m
- Drain hose
- Power cord without plug
- Rinse aid dispenser
Preparred for detergent pump installation (screw in tank rear wall)
Vertically adjustable stainless steel legs, regulated from 100 to 150 mm

The refrigerator is designed to store food at a temperature of +3 °C to +5 °C.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Four drawers can hold 3x (GN1/1 150) and 1x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side of the refrigerator as standard.
If necessary, the cabinet position can be changed (note when ordering).
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order shelf board that can be lifted on guides (please specify when ordering).

Perfect for plating food in refined shapes.

Workbench with 3-point support posts.
The base plate can be adjusted to 2 different heights, screwed construction.
Rounded corners.
High load capacity - up to 500 kg.
The housing is made of premium stainless steel AISI 304.
Adjustable height, square profile legs 40 x 40 mm.
Dimensions: 1200 x 800 x 870 mm.
Maximum height 900 mm.
Can be combined with drawer and waste bin modules installed below.
Manufactured in accordance with EU, CE hygiene and safety requirements and the material complies with European food standards.
Compact and space-saving.

Material: (housing) stainless steel; (interior) plastic, white.
Door lockable.
Door stop changeable.
7 evaporator grids, fixed (7 compartments).
Digital temperature control (DIXELL).
Static cooling.
Manual defrost.
Temp.
-10 / -25 °C.
Connection: 230 V - 50 Hz - 0.210 kW.
Grids (fixed): 7x W 431 x D 415 mm.
Content: 361 liters.
Internal dimensions: W 510 x 485 x 1620 mm.
External dimensions: W 600 x D 585 x H 1850 mm.
2 adjustable feet + 2 castors (rear).
Weight: 95kg.
Refrigerant: R600a.
Sound level: 37dB(A).

Material: (housing) stainless steel, (interior) galvanized steel.
For 2 pizzas of max.
Ø 33 cm.
Top and bottom heat separately adjustable.
Insulation with rock wool.
High quality pizza oven.
For cleaning we recommend our brass brush (217-1025).
Only clean the fireclay bricks when they are dry and cold, (risk of breakage).
Weight: 48 kg.
Dimensions: W 530mm x T 430mm x H 520mm.
temp.
+50/+300 °C.
Conn.: 230 V - 50 Hz - 5 kW.