The device is designed for use in bars, pubs, cafes and restaurants.
The robust housing is made of AISI 304 stainless steel.
Plastic interior.
The air vents on the front of the housing allow the ice maker to be installed under the counter.
The device uses the spray method to form perfectly transparent cubes with a larger cooling surface and longer cooling time - while reducing the thinning of drinks.
Innovative method of heat exchange through an additional condenser - compressor heat recovery, which is used to defrost the spray plate.
Extended compressor performance and service life.
Efficient operation at ambient temperatures up to 42 °C.Low energy consumption.
Adjustment of the ice container filling level.
Adjustable feet.
Easy to clean thanks to removable parts.
Inlet and outlet hoses and ice scoop.
Refrigerant: R454c.
Daily production: 120 kg.
Ice bin capacity: 45–50 kg.
Dimensions: 820 × 580 × (H) 940 mm.
Power/voltage: 844 W / 230 V.

Enables simultaneous blending of a batch of products of a maximum volume of approx.
80 litres.
Stainless steel 420 mm long blending arm.
Max.
permissible immersion during operation: 370 mm
Constant revolution speed: 12,000 rpm.
Knife guard diameter: ø98 mm
Net weight: 4.65 kg.
Additional blending or beater arms of the MA series (3030685, 3030687, 3030686) sold separately.

Fits on HENDI Profi Line and Polycarbonate GN containers.

Supplied with wind screen.

Elevated stainless steel grid for keeping warm sauces and finished food.

Gas hose with quick connector fitting to the barbecue.

Gas hose and regulator attach to gas bottle - improved portability.

Bolted construction for self-assembly, enabling easy transport and storage of the furniture.
Made of stainless steel.
Version without front cover and side covers.
Embossment in the chamber - a slope towards the siphon, the so-called "envelope".
Chamber height: 300 mm.
Standard hole in the bottom for the siphon: ø50 mm.
Centrally located place for mounting the battery: ø30 mm.
Splashback 40 mm high to protect the wall against stains.
Distance from the rear edge to the chamber: 100 mm.
Legs made of 40x40 mm profiles.
Adjustable feet in the range: +25/-5 mm.

With a beam connecting the rear legs for stabilisation.