Rectangular.

Housing and milk jug made of stainless steel with a handle made of ABS.
6 functions: hot thick milk foam, hot thin milk foam, cold milk foam, warm milk, hot chocolate, tea with hot milk.
The milk jug is detachable for easy pouring.
Capacity – frothing: 300 ml / heating: 600 ml.
Jug diameter: 130 mm.
For use with cold milk.
Lid and whisk are dishwasher safe.
Included in the set: lid, whisk accessories.
The frothing effect also can be achieved with vegan milks, such as oats, almond, soya; preferably “Barista” type.
The effect may vary depending on the milk producer.

Made of stainless steel.
Equipped with a two-speed filling system:
– quick gear for lifting the piston
– slow gear (low load) for filling the skins with stuffing.
Parts that have contact with food are removable for easy filling and cleaning.
Supplied with a set of 4 stainless steel funnels, diameter: ø16, ø22, ø32 and ø38 mm, 180 mm long.
Equipped with bearings and gear train made of hardened steel, resistant to pressure.

Ideal for storage, transport and serving of hot and cold drinks.

Robust LDPE polyethylene housing.

Good polyurethane foam insulation.

4 heavy duty clamps, 25 mm wide, at either side of the jug, for easy and quick opening and closing.

Comfortable transport grips.

Tap distance from the floor: 95 mm.

Recessed tap - protection against transport damage.

Delivered with stickers for quick identification of drinks.

Vent for easier lid opening.

Shock and impact resistant.

Rounded chamber with grooves leading to the tap.

For slicing a round pie or cake in equal parts.

During softener regeneration the connected machine must not be used.

Maximum/minimum water pressure: from 1 to 8 bar.

Nominal flow: 1000 L/h.

Ambient temperature: from 4 °C to 35 °C.

Supply water temperature: from 4 °C to 25 °C.

Connection size: 3/8”.

Enamelled cast iron griddle and 2 Gastronorm 1/1 grids included.

Supplied with wind screen.

Elevated stainless steel grid for keeping warm sauces and finished food.

Gas hose with quick connector fitting to the barbecue.

Gas hose and regulator attach to gas bottle - improved portability.

Very robust design, can be mounted on the floor or stand free.

Easy to empty, upper part can be unlocked with a key and then emptied.

Base is Ø 170 mm, pole is Ø 75 mm.