With turned up back edge and base shelf.
Height-adjustable feet (+/- 25 mm).
Sink drain valve 1½ ″.
Recessed worktop made of 1.0 mm thick stainless steel sheet.
Stainless steel square tube legs (30x30 mm).
Can be ordered without back edge.
Can be ordered with a tap hole (Ø 32 mm).

With turned up back edge and base shelf.
Height-adjustable feet (+/- 25 mm).
Sink drain valve 1½ ″.
Recessed worktop made of 1.0 mm thick stainless steel sheet.
Stainless steel square tube legs (30x30 mm).
Can be ordered without back edge.
Can be ordered with a tap hole (Ø 32 mm).

Food transport trolley.
Trolley body made of 1.2mm thick stainless steel sheet material.
Stainless steel round tube handle (Ø30mm).
Stainless steel round tube railing (Ø15mm).
20 pairs of guides for trays (530x325mm).
Guide spacing 120mm.
Two doors with 270° opening hinges.
Doors fixed with magnets in the closed and open positions.
Doors with latch.
Four wheels, two of which with brakes.
Wheel diameter 160mm.

The bartender's workbench is designed to store drinks at a temperature of +3 °C to +5 °C.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+ 15mm).
One drawer with internal dimensions (305mm x 510mm x H250mm).
Different beverage boxes or bottles can be placed in the drawer.
The drawer opens 110% so that it is convenient to place beverage boxes/beverages in the drawer.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet is located on the left side as standard.
If necessary, the cabinet position can be changed (note when ordering).
The cabinet has a height-adjustable shelf.
On the work surface: Cold recess for bottles (can hold ~9 x 0.7L bottles).
Recess for ice cubes size GN 1/2 150 (with ice water drainage to the sewer).

Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Six drawers hold 4x (GN1/1 100) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
One cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 10x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.

Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with 1½ ″ strainer drain.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The rack consists of removable modules with a width of 103mm.
NB! Specify when ordering: Can be ordered with a rear edge (60mm).
Location of the dishwasher interface (left or right).

Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with 1½ ″ strainer drain.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The rack consists of removable modules with a width of 103mm.
NB! Specify when ordering: Can be ordered with a rear edge (60mm).
Location of the dishwasher interface (left or right).

Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with 1½ ″ strainer drain.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The rack consists of removable modules with a width of 103mm.
NB! Specify when ordering: Can be ordered with a rear edge (60mm).
Location of the dishwasher interface (left or right).

Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with 1½ ″ strainer drain.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The rack consists of removable modules with a width of 103mm.
NB! Specify when ordering: Can be ordered with a rear edge (60mm).
Location of the dishwasher interface (left or right).

Stainless steel pre-wash table.
Work surface made of 1.0mm thick stainless steel sheet material.
A basket groove in the work surface and a dishwasher connection at one end.
Waste strainer and 1½ ″ shut-off valve on the sink.
Stainless steel square tube legs (30x30mm).
Adjustable height-adjustable feet (+/- 25mm).
NB! When ordering, specify: Sink size (see table).
Can be ordered with a rear edge (60mm).
Can be ordered with pre-wash shower holes (2x Ø 25mm).
Dishwasher connection location (left or right).

The "Liisa" display case is designed for short-term serving of chilled food at temperatures from +3°C to +5°C.
The display case is primarily intended for installation in a self-service line.
Digital thermostat.
Adjustable height legs (+/- 15mm).
Top with LED lighting.
The top of the display case is self-service (with doors that can be lifted by the customer).
The first level has a cold recess (suitable for storing e.g.
drinks) and 3 glass shelves above it.
There are two slides on the server side.
The lower part of the display case has a refrigerator with drawers that can accommodate 2x (GN 1/1 200) GN containers.
The drawer opens 110% so that GN containers are conveniently placed in the drawer.
The drawer slides have pull-back locking systems.
The drawer slides are quick-changeable if necessary.
The device is designed to operate in a room with a temperature of +10…+25 °C.

The drop-in cold storage is for short-term serving of chilled food at a temperature of +3°C to +5°C.
Integrated into a frame or worktop, the bottom of which must be open and not tightly closed, installation opening size 1540x585mm.
Mechanical thermostat.
The cold storage can accommodate 4x (GN 1/1 150) GN dishes.
The cold storage can be ordered with a 1600mm top or delivery level.

The drop-in cold table is for short-term serving of food at a temperature of +3°C to +5°C.
Integrated into a frame or worktop, the bottom of which must be open and not tightly closed, installation opening size 1500x575mm.
Mechanical thermostat.
4x (GN 1/1) GN dishes or plates/pans can be placed on the cold table.
The cold table can be ordered with a 1600mm top or delivery table.

The drop-in cold storage is for short-term serving of chilled food at a temperature of +3°C to +5°C.
Integrated into a frame or worktop, the bottom of which must be open and not tightly closed, installation opening size 1140x585mm.
Mechanical thermostat.
The cold storage can accommodate 3x (GN 1/1 150) GN dishes.
The cold storage can be ordered with a 1200mm top or delivery level.