Полки для хранения и мебель

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 300 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 300 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 400 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 400 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 400 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 400 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 500 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 500 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 500 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 500 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 600 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 600 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 600 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 600 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 800 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 800 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 300 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 300 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 400 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 400 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 500 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 500 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 600 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 600 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 800 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.

The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 800 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.

All parts of the ladder are made of light and strong aluminum.
The ladder is mounted in the working position using rivets and can no longer be folded.
First spring wheels and rear fixed wheels are standard equipment.
When stepping on the ladder, the front wheels collapse. and the ladder is firmly fixed in place.
The steps and the upper platform of the stairs are equipped with a non-slip embossed pattern.
The stairs also have hand rests to facilitate climbing and safe railings of the upper platform.
the height of the upper platform is 2000.
The steps number with upper platform 8.
External dimensions 740x1640x2680mm.
Weight 21 kg.
The ladder is delivered in parts.

Strong and quietly rolling forklift for a good price!
Maximum lifting force kg: 2500
Forklift with rubber wheels rolls quietly and does not damage the floor. Suitable for use in shops and also on uneven surfaces.
Maximum lifting height mm: 200
My lifting height: 80
Fork length mm: 1150
Fork width mm: 540
Rubber covered handle ensures a firmer and more comfortable grip. Better to use also in cold storage.
Guide wheels 180x50: rubber
Fork wheels: Polyurethane / Tandem. Double wheels make it easier to move heavy pallets on uneven surfaces, on inclines and over thresholds. With double wheels, the mass is distributed more evenly over a larger surface.

Net weight kg: 62

Galvanized steel pipe and steel wire trolley.
The double-level trolley is suitable for use in both shops and warehouses.
The upper level can be raised.
The trolleys can be pushed into each other for storage.
The trolley has four rotating rubber wheels with a diameter of 125 mm.
The external dimensions of the trolley are 1030x530x1020mm.
The carrying capacity of the trolley is 300 kg.
Weight is 22 kg.
The trolley is delivered in parts.