Shelf without filling, non-adjustable – distance from the floor to the lower edge of the shelf is 160 mm.

Welded construction ensuring durability and stability.
Made of stainless steel.
Sink bowls welded seamlessly into the countertop, pressed from one sheet of stainless steel.
Sink chambers covered with a front cover.
Standard embossing in the bottom for the siphon: Ø50 mm.
Tap hole Ø30 mm.
The 10 mm embossing of the top prevents water from pouring out from the front and sides.
Splashback 40 mm high to protect the wall against stains.
Rear legs moved 100 mm away from the wall to facilitate wall installation.
The approximate permissible load on the countertop: 70 kg/m².
Adjustable feet in the range: +25/-5 mm.

Stainless steel pre-washing table with roller track.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with waste strainer and 1½ ″ shut-off valve.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The grid consists of removable modules with a width of 103mm.
NB! Please specify when ordering: Can be ordered with a rear edge (60mm).
Can be ordered with pre-washing shower holes (2x Ø 25mm).
Dishwasher interface location (left or right).

Dimensions: 1600x700x870+100 mm.
Rounded corners.
Height-adjustable stainless steel legs (40x40mm).
Double-walled stainless steel worktop.
1 sink on the left, 1 storage compartment on the right.
Worktop thickness 40 mm.
Overflow included.
Sink dimensions 600 x 500 x 300 mm.
Drain dimensions Ø 50 mm.