Sink table with shelf and space for undercounter dishwasher, HENDI, right, 1200x700x(H)850mm
EAN: 8711369237526
Brand:
Qty: 2
Delivery time: 5-10 workdays
For placement over an undercounter appliance.
Made of high-quality stainless steel (AISI 430).
Worktop is reinforced and deepened, with a 40 mm upstand at the back.
Spread load capacity: 70kg/m².
The integrated sink (AISI 304) measures 400x400x(H)250 mm, comes with a ø30 mm pre-drilled tap hole.
The reinforced shelf measures 575x585 mm and is non-adjustable.
The legs are adjustable in height to guarantee level instalment (+25/-5 mm).
Spread load capacity: ≈70 kg/m².
Versions available for left- & right-side instalment.
Flat pack delivery, assembly required.
| Product dimensions | 1200x700x850mm |
| Net weight, kg | 25.5 |
357,00 €
Cabinet with sliding doors.
643,00 €
With turned up back edge and base shelf.
Height-adjustable feet (+/- 25 mm).
Sink drain valve 1½ ″.
Recessed worktop made of 1.0 mm thick stainless steel sheet.
Stainless steel square tube legs (30x30 mm).
Can be ordered without back edge.
Can be ordered with a tap hole (Ø 32 mm).
498,00 €
Shelf without filling, non-adjustable – distance from the floor to the lower edge of the shelf is 160 mm.
274,00 €
Welded construction ensuring durability and stability.
Made of stainless steel.
Sink bowls welded seamlessly into the countertop, pressed from one sheet of stainless steel.
Sink chambers covered with a front cover.
Standard embossing in the bottom for the siphon: Ø50 mm.
Tap hole Ø30 mm.
The 10 mm embossing of the top prevents water from pouring out from the front and sides.
Splashback 40 mm high to protect the wall against stains.
Rear legs moved 100 mm away from the wall to facilitate wall installation.
The approximate permissible load on the countertop: 70 kg/m².
Adjustable feet in the range: +25/-5 mm.
429,00 €
