Very easy in use, cleaning, maintenance and even servicing.
Perfect for washing plates, cutlery, glasses, mugs, trays, GN containers.
Electromechanical controls.
Housing made of stainless steel AISI 304.
Separate stainless steel spray arms for washing and rinsing.
4 surface filters over tank water level.
Additional sieve in front of the pump inlet.
Built-in springs for easy hood lift.
Washing cycles number/duration: 1/120 s.
Capacity: up to 30 baskets/h.
Water consumption per cycle: 2-2,5 l (depending on water pressure).
Washing water temperature: 62°C, rinse water temperature: 85°C.
Boiler (capacity/power): 7,4 l/7,5 kW.Tank (capacity/power): 68 l/6,0 kW.
Pump power: 1,5 HP.
Safety thermostat for boiler/for tank up to 105°C/99°C.
Analog water thermometer for boiler and tank.
IP44 protection class.
Weight 111 kg.

EQUIPMENT:
- 1x universal basket 500x500x(H)105 mm for glasses
- 1x basket with pins 500x500x(H)105 mm for plates
- 1x cutlery basket 110x110x(H)130 mm
- Water supply hose length 1,5 m
- Drain hose
- Power cord without plug
- Rinse aid dispenser
Preparred for detergent pump installation (screw in tank rear wall)
Vertically adjustable stainless steel legs, regulated from 100 to 150 mm

Grill surface: 220x230 mm.
Ribbed.

Non-adjustable shelf – the distance from the floor to the lower edge of the shelf is 160 mm.
Approximate permissible shelf load: 70 kg/m².

Perfect for quartering and slicing raw meat.

Digital displays on pagers for marking order/table number (programmable numbers from 001 to 998).
Controller with a touch keypad.
Built-in antenna in the controller ensuring no signal interference from other devices.
3 notification modes: vibration, sound, LED light.
Combine notification modes – all switched off with one click.
Space-saving charging: pagers are stacked on the charger.
Reach: 500 m.
Pager dimensions: 65x65x15 mm.
Max.
pagers programmable into 1 controller: 998.
Included in set: controller, 10 pagers, charging station, charger and USB-C to USB-C cable.
Pagers are also sold separately – 10 pcs.
(code: 201640).

Protect the cotton candy machine from dust and dirt.
Made of plexiglass.
Suitable for HENDI cotton candy machine 282731.

For easy lifting and removing pizza dough from the box, dividing it, and scraping off.
Working part made of AISI 301 stainless steel.
Handle made of PP (polypropylene).

Designed by the renowned Dutch designer Robert Bronwasser – functional, ergonomic, and sturdy.
Dishwasher safe.