Dimensions (pizza oven only): 80 × 81 × 96 cm (W × D × H, including chimney)
Dimensions with Baso-XL stand: 180 × 81 × 182 cm (W × D × H, including chimney)
Weight: Oven + stand approx. 140 kg; pizza oven only approx. 76 kg
Material: Stainless steel interior, Cor-Ten steel exterior
Thermal insulation: 10 cm stone wool in the roof and walls
Stone baking surface: 60 × 60 cm (holds 2 pizzas of approx. 30 cm at a time)
The pizza stones (made in Italy) are manufactured from a mixture of refractory clay and aluminium oxide, ensuring fast heating and excellent baking results
Double-layer door with a reflector plate that reflects heat back into the oven
Oven thermometer range: 0–500°C
The oven can accommodate a low pot or pan measuring up to 30 × 59 × 11 cm (W × D × H)
Drainage holes in the bottom allow condensation to drain from the oven when necessary
Transported in parts and packed on a pallet
Assembly time: approx. 15–20 minutes
Designed for outdoor use
Do not leave unattended when flammable materials are nearby
Detailed assembly and maintenance instructions can be found in the product manual

Note: Due to heat, parts of the stainless steel chimney may turn violet. This does not affect the performance or properties of the product.

Baso-XL Stand:

Large and practical – dimensions: 180 × 70 × 85 cm (W × D × H)
Weight: Approx. 68 kg (approx. 140 kg together with the pizza oven)
Material: Cor-Ten and stainless steel
Assembly time: approx. 40–60 minutes
The pizza oven can be installed on either the right or left side
Shelves for firewood and accessories
Prepared for wheels; wheels are available as an optional accessory
Leg height can be adjusted to two positions, ensuring the work surface remains at the same height (85 cm) with or without wheels
The preparation area with raised edges is ideal for preparing dough and pizzas

Note: Cor-Ten steel products are supplied with an untreated surface. When new, COR-TEN® steel is grey in colour, similar to standard hot-rolled steel. Weathering instructions are available on the website or can be accessed by scanning the code directly on the product.