PIZZA WORK TABLE KTL/P-1617
A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Seven drawers hold 7x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section for 1/6 GN containers.
The cold recess can hold 9x (GN1/6 150).
The cold compartment is covered by an acrylic glass lid.
| Product dimensions | 1600 x 800 x 900 mm |
Equipped with 7 uncooled drawers of 400x620x(H)65 mm.
Chamber dimensions: 1480x670x(H)570 mm.
60 mm thick polyurethane foam insulation.
2 shelves (600x400mm) included.
Spread load capacity of 15 kg each.
Energy label (counter only): A (A+++-G).
Weight: 367 kg.
Refrigerated worktop.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly changed if necessary.
At the rear edge of the worktop, there is a raised cold recess section for 1/6 GN containers.
The cold recess holds 4x (GN1/6 150).
The cold recess is covered by an acrylic glass lid.
A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Five drawers hold 4x (GN1/1 100) and 1x (GN1/1 150) GN containers.
The drawers open 110% so that GN containers are easy to place in the drawers.
The drawer sliders have pull-back locking systems.
The drawer sliders can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
The rear edge of the worktop has a raised cold recess section 1/6 For GN containers.
The cold cavity holds 7x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.
A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Nine drawers can hold 4x (GN1/1 100), 3x (GN1/1 150) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
The cabinet has 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
There is a raised cold cavity part for 1/6 GN containers.
The cold cavity can hold 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.
A refrigerated worktop with a deeper worktop than a KTL.
Digital thermostat.
Automatic defrosting.
Quick-change refrigeration unit.
Adjustable height legs (+/- 15mm).
Six drawers hold 4x (GN1/1 100) and 2x (GN1/1 200) GN containers.
The drawers open 110% so that GN containers can be conveniently placed in the drawers.
The drawer slides have pull-back locking systems.
The drawer slides can be quickly replaced if necessary.
Both cabinets have 8 pairs of guides for GN containers (GN1/1 50).
If desired, it is possible to order a shelf plate that can be lifted on the guides (please specify when ordering).
At the rear edge of the worktop there is a raised cold recess section 1/6 For GN containers.
The cold cavity holds 10x (GN1/6 150).
The cold cavity is covered by an acrylic glass lid.
