Bolted construction for self-assembly, enabling easy transport and storage.
Chamber welded seamlessly into the countertop, pressed from one sheet of stainless steel.
Sink dimensions: 400x400x(H)250 mm.
Standard siphon embossing in the bottom: ø52 mm.
Guides on the countertop to easily move the baskets on the countertop.
Legs made of 40x40 mm profiles.
The approximate permissible load on the countertop is 70 kg/m².
Adjustable feet in the range: +25/-5 mm.

Stainless steel sorting table with roller track and shelf.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with 1½ ″ strainer drain.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The rack consists of removable modules with a width of 103mm.
NB! Specify when ordering: Can be ordered with a rear edge (60mm).
Location of the dishwasher interface (left or right).

Cabined with hinged doors, with hinges on the left.
Magnetic latches.

Shelf without filling, non-adjustable – distance from the floor to the lower edge of the shelf is 160 mm.

Stainless steel pre-washing table with roller track.
Work surface (sink) made of 1.0mm thick stainless steel sheet material.
Work surface with basket groove and dishwasher interface at one end.
The roller track consists of machine-washable modules.
Sink with waste strainer and 1½ ″ shut-off valve.
Stainless steel square tube legs (30x30mm).
Legs with adjustable height (+/- 25mm) on the legs.
The grid consists of removable modules with a width of 103mm.
NB! Please specify when ordering: Can be ordered with a rear edge (60mm).
Can be ordered with pre-washing shower holes (2x Ø 25mm).
Dishwasher interface location (left or right).