Designed for cutting large amounts of vegetables.
Large inlet for large vegetables, up to Ø 165 mm.
Small inlet for long vegetables, i.e.
carrots, cucumbers up to Ø 55 mm.
Cutting chamber housing made of cast aluminium, bottom part of the housing made of stainless steel.
Convenient pressing handle.
750W = 1hp air-cooled high-performance motor.
Low-voltage control buttons: STOP, START (24 V).
2 security systems: cutter switches off upon lifting of the pressing handle and upon lifting of the upper cover of the chamber.
Upon lowering of the pressing handle the cutter starts automatically.
Easy and fast replacement of cutting disks.
5 cutting discs included: 2 mm slices (disc with 3 blades) 4 mm slices (disc with 3 blades) 3 mm grater 4,5 mm grater 7 mm grater Evacuation disc.
4 rubber anti-slip feet.
Speed: 300 RPM.
Productivity: 100 – 350 kg/h
Weight: 25 kg.

Fixed shelves 6 x 588 x 496 mm
Weight: 95.5 kg

Designed for efficient transport of hot or cold food.
Maintains the right temperature for more than 4 hours.
Durable, solid polyethylene housing resistant to mechanical damage.
Thick foam insulation.
2 compartments for containers.
Ergonomic handles.
Full width swing door for easy loading of the container.
Built-in seal and wide nylon snaps for airtight seal of the carrier.
Ventilation valve helps to maintain the right moisture level inside the insulated carrier.
4 castors – 2 fixed and 2 swivel (1 brake) for easy manoeuvring.
Impact-absorbing elements.
Easy cleaning.
Internal chamber dimensions: 330x545x485 mm.
CAUTION: Putting food with temperature above 121°C inside the carrier may damage the item.
CAUTION: The containers should be placed only on the guides.

Chamber dimensions: 610x700x(H)1540 mm.
3 shelves GN 2/1 (650x530 mm) included.
Spread load capacity of 40 kg each.
Energy label: B (A+++-G).
Weight: 120 kg.

The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R454c.
Daily output: 40 kg.
Ice bin capacity: 16-18 kg.
Dimensions: 480×580×(H)750 mm.
Power/voltage: 455 W/230 V.
Net/gross weight: 44/47 kg.