Designed for cutting large amounts of vegetables.
Large inlet for large vegetables, up to Ø 165 mm.
Small inlet for long vegetables, i.e.
carrots, cucumbers up to Ø 55 mm.
Cutting chamber housing made of cast aluminium, bottom part of the housing made of stainless steel.
Convenient pressing handle.
750W = 1hp air-cooled high-performance motor.
Low-voltage control buttons: STOP, START (24 V).
2 security systems: cutter switches off upon lifting of the pressing handle and upon lifting of the upper cover of the chamber.
Upon lowering of the pressing handle the cutter starts automatically.
Easy and fast replacement of cutting disks.
5 cutting discs included: 2 mm slices (disc with 3 blades) 4 mm slices (disc with 3 blades) 3 mm grater 4,5 mm grater 7 mm grater Evacuation disc.
4 rubber anti-slip feet.
Speed: 300 RPM.
Productivity: 100 – 350 kg/h
Weight: 25 kg.

The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R134.
Daily output: 18 kg.
Ice bin capacity: 10-11 kg.
Dimensions: 400×400×(H)650 mm.
Power/voltage: 180 W/230 V.
Net/gross weight: 28/30 kg.

Designed for slowly preparing or regenerating food, by means of a very accurately set and controlled process.
With core temperature probe, separately adjustable.
Recessed handles in the sides.
Easy to clean door seal.
Oven chamber is heated on 4 sides, uniformly distributing the heat throughout the chamber.
Energy efficient due to extra insulation.
Seamless oven chamber with rounded corners, easy to clean.
Temperature adjustable by 1 degree increments - oven chamber up to 120°C, core temperature and keep warm up to 100°C.
Door hinges left or right, easy to convert.
Digital setting and readout of time, set temperature, and current core/chamber temperatures.
Stainless steel pan and tray holder, suitable for GN 1/1 containers, grids and trays as well as 600x400 mm bakery trays, on 3 levels.

Very easy in use, cleaning, maintenance and even servicing
.
Perfect for washing plates, cutlery, glasses, mugs, trays
.
Electromechanical controls.

Housing made of stainless steel AISI 304
.
Separate spray arms for washing (plastic) and rinsing (stainless steel
).
Fixed washing arms at the top, rotating stainless steel rinsing arms
.
Solid double-skin door
.
Washing cycles number/duration: 1/120 s.

Capacity: up to 30 baskets/h.

Water consumption per cycle: 2-2,5 l (depending on water pressure)
.
Washing water temperature: 62°C, rinse water temperature: 85°C
.
Boiler (capacity/power): 6 l/3 kW for 230V and 6 kW for 400V
.
Tank (capacity/power): 35 l/2,8 kW.

Pump power: 0,75 HP.

Safety thermostat for boiler/for tank up to 105°C/99°C
.
Analog water thermometer for boiler.

IP44 protection class.

Weight: 57 kg
.
EQUIPMENT:
 1x universal baskets 500x500x(H)105 mm for glasses
, 1x basket with pins 500x500x(H)105 mm for plates
, 1x cutlery basket 110x110x(H)130 mm
, water supply hose length 1,5 m with connection 3/4” inner thread
, drain hose length 2 m Ø 25 mm
, power cord without plug, 
rinse aid dispenser
, adjusted for detergent pump installation (screw in tank rear wall). Vertically adjustable legs: ±10 mm, Ø 40 mm.