Condensate hood for Millennial TS ovens with 6 and 10 shelves, Tecnoeka
Single-phase engine with one rotation direction
Maximum air flow: from 400 m³/h to 600 m³/h
Housing made of highest quality AISI 430 steel
Connection to fresh water ¾” with water pressure 100-200 kPa (1.0-2.0 bar)
No connection to permanent duct or ventilation
chimney required
– Included:
– water connection hose with ¾” thread, 1.5 m long
– 1 labyrinth filter
– electric cable 1.6 m long
– sewer drain Ø 30 mm
| Main material | metal |
| Voltage, V | 230 |
| Material | stainless steel |
Programmable beverages include: espresso, long coffee, cappuccino, latte, hot milk, milk froth, hot water.
One touch cappuccino and latte macchiato.
With large coffee grounds container and waste water tank.
Digital control panel and display of functions, commands and errors.
Built-in grinder with adjustable grind options.
Built-in coffee beans container: 750 g.
Suitable also for ground coffee.
Fresh water tank: 1,8 L (external larger tank can be connected).
Drip tray: 2 L.
Adjustable coffee dispenser with scope of 80–140 mm.
Adjustable coffee strength: 7–14 g/portion.
Adjustable volume of beverage: 25–240 ml.
Adjustable volume of hot water: 25–450 ml.
Adjustable steam time: 3–120 s.
Coffee grounds container: 50 portions.
Individual and total beverages counter.
Automatic cleaning program.
Dimensions of refrigerated chamber: 1295x595x(H)500 mm.
Basin capacity: 5x GN 1/6, max. H 150 mm.
Delivered without containers.
2 auxiliary fans in the refrigerated chamber.
Weight: 99 kg.
Very easy in use, cleaning, maintenance and even servicing
.
Perfect for washing plates, cutlery, glasses, mugs, trays
.
Electromechanical controls.
Housing made of stainless steel AISI 304
.
Separate spray arms for washing (plastic) and rinsing (stainless steel
).
Fixed washing arms at the top, rotating stainless steel rinsing arms
.
Solid double-skin door
.
Washing cycles number/duration: 1/120 s.
Capacity: up to 30 baskets/h.
Water consumption per cycle: 2-2,5 l (depending on water pressure)
.
Washing water temperature: 62°C, rinse water temperature: 85°C
.
Boiler (capacity/power): 6 l/3 kW for 230V and 6 kW for 400V
.
Tank (capacity/power): 35 l/2,8 kW.
Pump power: 0,75 HP.
Safety thermostat for boiler/for tank up to 105°C/99°C
.
Analog water thermometer for boiler.
IP44 protection class.
Weight: 57 kg
.
EQUIPMENT:
1x universal baskets 500x500x(H)105 mm for glasses
, 1x basket with pins 500x500x(H)105 mm for plates
, 1x cutlery basket 110x110x(H)130 mm
, water supply hose length 1,5 m with connection 3/4” inner thread
, drain hose length 2 m Ø 25 mm
, power cord without plug,
rinse aid dispenser
, adjusted for detergent pump installation (screw in tank rear wall). Vertically adjustable legs: ±10 mm, Ø 40 mm.
Worktop made of AISI 304 stainless steel
Side panel made of AISI 430 stainless steel
Cabinet closed on 3 sides, internal dimensions: 1198x570x(H)470 mm
Cast iron heaters: 6x ø220 mm, 2.6 kW each
Steel, adjustable feet, 100-165 mm
Weight: 90 kg
The appliance is designed for use in bars, pubs, cafes, and restaurants.
Robust housing made of AISI 304 stainless steel.
Plastic interior.
Air vents on the front of the housing to allow for under-counter installation of the ice maker.
The appliance uses spray method to mould perfectly clear cubes with the hexagonal hole that have larger cooling surface and ensure longer cooling time – while minimising beverage thinning.
Innovative method of heat exchange via an additional condenser – compressor heat recovery used for defrosting the spray plate.
Extended compressor performance and life.
Effective operation in ambient temperature of up to 42°C.
Low energy consumption.
Adjustment of the ice bin fill level.
Adjustable feet.
Easy cleaning thanks to removable parts.
Inlet & outlet hoses and ice scoop included.
Refrigerant: R454c.
Daily output: 40 kg.
Ice bin capacity: 16-18 kg.
Dimensions: 480×580×(H)750 mm.
Power/voltage: 455 W/230 V.
Net/gross weight: 44/47 kg.
