Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.

Sink bowls pressed from a single sheet of stainless steel characterised by high resistance to food acids and chemicals
Sink bowl seamlessly welded into the stainless steel worktop.
Sink dimensions: 400x400x(H)250 mm.
All the remaining elements made of AISI 430 steel.
Drain compatible with standard traps: ø52 mm.
Worktop with 19 mm recess to prevent water from flowing in.
Available in right-hand and left-hand versions.
Screwed.
Feet made of 40x40 mm profiles.
Approximate maximum load per worktop – 70 kg/m².
Adjustable feet – 25 mm upwards or 5 mm downwards.

Bolted framework
Sink bowls and worktop made of AISI 304 acid resistant stainless steel
Formed chamber
Body and framework made of AISI 430, dimensions: 40x40 mm
Sink bowl: 400x400x(H)250 mm
Bottom opening for air trap: Ø 50 mm
Worktop opening: 10 mm
Bowls covered by a masking frame as standard
Wall edge: 40 mm
Permitted load depends on the wall and wall mounting
Tap opening: Ø35

With turned up back edge and base shelf.
Insoles with adjustable height on the feet (+/- 25 mm).
Sink drain valve 1½ ″.