STORES&WAREHOUSES
Subcategories
The external dimensions of the cabinet including the legs are 400x545x1900mm.
The cabinet body is welded together and powder coated.
The ventilation openings are located at the bottom and ceiling of the cabinet.
The body, doors and shelves are light gray RAL 7035.
Three shelves on the left side, on the other side a larger space for cleaning tools.
Three hooks and a towel tube on the door.
The cabinet has adjustable legs, the height of the legs is 150 mm.
The standard equipment includes a cylinder lock with two keys.< br />The cabinet is shipped assembled.
The outer dimensions of the cabinet including the legs are 600x500x1820mm.
Quick and easy to assemble.
The cabinet is made of sheet steel.
The body, shelves and doors are light gray RAL 7035.
The ventilation holes are located at the bottom of the cabinet doors.
Each cabinet has a hat rack and a hanging pipe with two hooks.
The cabinet doors are equipped with reinforcement ribs and name tag holders.
Cylinder locks are standard equipment, each lock has two keys.
Supplied in parts.< /p>
The outer dimensions of the cabinet are 900x500x1820mm.
Quick and easy to assemble.
The cabinet is powder-coated, made of sheet steel.
The body, doors and shelves are light gray RAL 7035.
The inside of the doors have reinforcement ribs, the door has a name tag holder.
Ventilation openings on the top and bottom of the doors.
The cabinet has a full-width upper shelf and a stationary partition.
3 shelves on the left side of the partition, on the right a hanger tube.
The standard equipment includes turn handle and cylinder lock with two keys.
Doors have 3-point locking system.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 300 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
Cabinet body made of 1.0mm thick stainless sheet material.
Insoles with adjustable height (+/- 25mm) on the legs.
Door with hinges opening over 100°.
Includes suction pipe/electric towel dryer (40W). and sink (340x400mm).
floor drain 1½ ″.
There are 5 racks in the cabinet.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 300 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
Cabinet body made of 1.0mm thick stainless sheet material.
Insoles with adjustable height on the legs (+/- 25mm).
Two doors with hinges that open over 100°.
Top and bottom perforated.
Includes a drain pipe/electric towel rail (40W) and a sink (340x400mm).
Sink drain 1½ ″.
There are 5 racks in the cabinet.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 400 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 400 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 400 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 400 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 500 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 500 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 500 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 500 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 600 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 600 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 600 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 600 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 800 mm.
The exact width of the main part is 1045 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 200 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 800 mm.
The exact width of the additional part is 1000 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 300 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 300 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 400 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 400 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 500 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 500 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 600 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 600 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
The set includes 2 side frames, 5 shelf plates, 1 back cross and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connecting elements between the posts and fasteners.
Each the carrying capacity of the shelf plate for an evenly distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the main part is 2100 mm, the depth is 800 mm.
The exact width of the main part is 1215 mm.
The main part is independent shelf.
Additional parts with the same depth measurement can be attached to the main part to extend the shelf.
Supplied in parts.
The set includes 1 side frame, 5 shelf plates and shelf carriers.
The shelf plates and side frames are made of galvanized sheet metal.
The side frame consists of two posts, two post soles, connection elements between the posts and fasteners.
The bearing force of each shelf plate is evenly for a distributed load is 150 kg.
The adjustment step of the shelf surface is 50 mm.
The height of the additional part is 2100 mm, the depth is 800 mm.
The exact width of the additional part is 1170 mm.
The additional part is not an independent shelf .
To form a multi-part shelf row, one or more additional parts must be attached to the main part in sequence.
Supplied in parts.
All parts of the ladder are made of light and strong aluminum.
The ladder is mounted in the working position using rivets and can no longer be folded.
First spring wheels and rear fixed wheels are standard equipment.
When stepping on the ladder, the front wheels collapse. and the ladder is firmly fixed in place.
The steps and the upper platform of the stairs are equipped with a non-slip embossed pattern.
The stairs also have hand rests to facilitate climbing and safe railings of the upper platform.
the height of the upper platform is 2000.
The steps number with upper platform 8.
External dimensions 740x1640x2680mm.
Weight 21 kg.
The ladder is delivered in parts.
Strong and quietly rolling forklift for a good price!
Maximum lifting force kg: 2500
Forklift with rubber wheels rolls quietly and does not damage the floor. Suitable for use in shops and also on uneven surfaces.
Maximum lifting height mm: 200
My lifting height: 80
Fork length mm: 1150
Fork width mm: 540
Rubber covered handle ensures a firmer and more comfortable grip. Better to use also in cold storage.
Guide wheels 180x50: rubber
Fork wheels: Polyurethane / Tandem. Double wheels make it easier to move heavy pallets on uneven surfaces, on inclines and over thresholds. With double wheels, the mass is distributed more evenly over a larger surface.
Net weight kg: 62
Galvanized steel pipe and steel wire trolley.
The double-level trolley is suitable for use in both shops and warehouses.
The upper level can be raised.
The trolleys can be pushed into each other for storage.
The trolley has four rotating rubber wheels with a diameter of 125 mm.
The external dimensions of the trolley are 1030x530x1020mm.
The carrying capacity of the trolley is 300 kg.
Weight is 22 kg.
The trolley is delivered in parts.
The steps are equipped with a relief pattern for safety reasons.
The safety step is made of red (RAL 3000) plastic, made in Germany.
The safety step has 3 wheels equipped with springs.
When stepping on the safety step, the wheels sink in and the step is fixed. securely in place.
A rubber seal on the bottom edge ensures particularly good adhesion to the floor.
The safety step is a simple, effective and safe aid for reaching goods higher than a person can reach.
The diameter of the bottom part of the safety step is 440 mm.
Diameter of the top of the safety step 290 mm.
Height 425 mm.
Maximum permissible load 150 kg.
Weight 3.7 kg.
Supplied in two parts, assembly without tools.
It is possible to order different variants:
COLOR: grey, transparent, orange, white
LENGTH: 900mm, 1000mm, 1190mm, 1250mm, 1295mm, 1330mm
WIDTH: 30mm, 40mm, 60mm
Ask for an offer!
WIDTH: 40mm.
Possibility to order in different lengths: 50mm, 70mm, 90mm, 105mm, 120mm.
Ask for an offer!
Dimensions 600x800mm.
Platform size 800x500mm.