Sink tables and sinks
Subcategories
Easy and hygienic washbasin operation using the leg mechanism.
The washbasin is installed in a handy cupboard, where cleaning agents may be stored.
Open rear cupboard wall.
Door with a knob provided as a convenient depression along the entire level.
Adjustable feet: 130 to 195 mm.
The entire kit is made of AISI 304 stainless steel.
Chamber dimensions: 440x286x(H)125 mm.
Rear edge (H)100 mm.
Two separate hot and cold water inlets; 3/8" connector.
The set includes: an otlet (H)185 mm and a knee-operated starting mechanism with a return valve.
NOTE: The delivery does not include hoses, seals, a siphon and a wall mounting set for the washbasin.
Net weight: 16.1 kg.
Easy and hygienic keen operation by pressing a button in front of the washbasin. The water stream flows for 4-6 s. The washbasin is installe inside a convenient cupboard, where cleaning agents may be stored.
Open rear cupboard wall. The door with a handle formed as a convenient depression along the entire height. Adjustable feet: 130 to 195 mm. The entire kit is made of AISI 304 stainless steel. Chamber dimensions: Ø340x125 mm. Rear edge (H)100 mm. Single mixed (hot and cold) water inlet; G 1/2" connector. The kit includes: an outlet (H)185 mm and a knee-operated starting mechanism with a return valve. Note: The delivery does not include hoses, seals, a siphon and a wall mounting set for the washbasin. Net weight: 13.4 kg.
Easy and hygienic knee operation by pressing the front panel.
The water stream flows for 4-6 s.
The entire kit is made of AISI 304 stainless steel.
Chamber dimensions: 340x230x(H)115 mm.
Anti-splash wall shield (H)100 mm.
A single mixed (hot and cold) water outlet; G 1/2" connector.
The kit includes: an outlet (H)185 mm and a knee-operated starting mechanism with a return valve.
NOTE: The delivery does not include hoses, seals, a siphon and a wall mounting set for the washbasin.
Net weight: 5.5 kg.
Made of durable stainless steel (AISI 304).
Intended for wall-mounting.
Internal dimensions 350x250x(H)100mm.
ø35mm opening for tap instalment, fits HENDI 970522 tap.
ø52mm drain compatible with standard traps
Bolted framework
Sink bowls and worktop made of AISI 304 acid resistant stainless steel
Formed chamber
Body and framework made of AISI 430, dimensions: 40x40 mm
Sink bowl: 400x400x(H)250 mm
Bottom opening for air trap: Ø 50 mm
Worktop opening: 10 mm
Bowls covered by a masking frame as standard
Wall edge: 40 mm
Permitted load depends on the wall and wall mounting
Tap opening: Ø35
Bolted framework
Sink bowls and worktop made of AISI 304 acid resistant stainless steel
Formed chamber
Body and framework made of AISI 430, dimensions: 40x40 mm
Sink bowl: 400x400x(H)250 mm
Bottom opening for air trap: Ø 50 mm
Worktop opening: 10 mm
Bowls covered by a masking frame as standard
Wall edge: 40 mm
Permitted load depends on the wall and wall mounting
Tap opening: Ø35
Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.
Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.
Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.
Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.
Durable construction made entirely of AISI 430 stainless steel.
Sink with the dimensions of 400x400x (H) 250mm.
Sink bowl pressed from a single sheet of steel, seamlessly welded into the worktop.
Drain compatible with standard traps: ø50 mm.
A special opening for installing a Ø30 mm tap.
A 40 mm backsplash on one side of the table protects the walls from stains.
Non-adjustable shelf, distance from the floor to the bottom edge of the shelf: 160 mm.
Legs made of 40x40 mm profiles.
Screwed structure allows for folding, storage and transport of the piece of equipment.
Piece of equipment designed for work performed in the kitchen.
Approximate maximum load per worktop: 70 kg/m².
Adjustable feet: +25/-5 mm.
Basins welded, made of AISI 304 stainless steel for high resistance to food acids and chemicals.
Embossed area – drop towards the trap, envelope-shaped.
Drain compatible with standard traps: ø50 mm.
40 mm backsplash to prevent water from flowing out.
Framework and body made of standard AISI 430, dimensions 40x40 mm.
Basin table front cover – made of AISI 430 steel.
Welded for high durability and stability.
Adjustable feet: +25/-5 mm.
Tap opening: ø30 mm.
Made of durable stainless steel (AISI 304).
Duo 400x400x(H)250mm sinks.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
With a 40mm upstand.
Shelf reinforced with a steel profile.
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink bowls pressed from a single sheet of stainless steel characterised by high resistance to food acids and chemicals
Sink bowl seamlessly welded into the stainless steel worktop.
Sink dimensions: 400x400x(H)250 mm.
All the remaining elements made of AISI 430 steel.
Drain compatible with standard traps: ø52 mm.
Worktop with 19 mm recess to prevent water from flowing in.
Available in right-hand and left-hand versions.
Screwed.
Feet made of 40x40 mm profiles.
Approximate maximum load per worktop – 70 kg/m².
Adjustable feet – 25 mm upwards or 5 mm downwards.
Sink bowls pressed from a single sheet of stainless steel characterised by high resistance to food acids and chemicals
Sink bowl seamlessly welded into the stainless steel worktop.
Sink dimensions: 400x400x(H)250 mm.
All the remaining elements made of AISI 430 steel.
Drain compatible with standard traps: ø52 mm.
Worktop with 19 mm recess to prevent water from flowing in.
Available in right-hand and left-hand versions.
Screwed.
Feet made of 40x40 mm profiles.
Approximate maximum load per worktop – 70 kg/m².
Adjustable feet – 25 mm upwards or 5 mm downwards.
Dimensions: 1000x600x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 800 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1000x700x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 860 x 500 x 380 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1200x700x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 950 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1200x600x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 950 x 400 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1400x700x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1200 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1400x600x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1200 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1600x700x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable feet with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1400 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1600x600x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1400 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1600x700x870+100 mm.
Pot washing sink with 2 sinks.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 700 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1600x600x870+100 mm.
Pot washing sink with 2 sinks.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 700 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1800x700x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1600 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1800x600x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1600 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1800x700x870+100 mm.
Pot washing sink with 2 sinks.
Rounded corners.
Adjustable feet with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 800 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 1800x600x870+100 mm.
Pot washing sink with 2 sinks.
Rounded corners.
Adjustable feet with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 800 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 2000x700x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1800 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 2000x600x870+100 mm.
Pot washing sink with 1 sink.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 1800 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 2000x700x870+100 mm.
Pot washing sink with 2 sinks.
Rounded corners.
Adjustable legs with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 900 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions: 2000x600x870+100 mm.
Pot washing sink with 2 sinks.
Rounded corners.
Adjustable feet with square profile 40x40mm.
Made of high quality stainless steel.
Sink dimensions 900 x 500 x 350 mm.
Stainless steel legs 40 x 40 mm.
Work surface thickness approx.
1.5 mm.
Dimensions of the sink 88.5x54x30cm.
With an upturned back edge and a base shelf.
Insoles with adjustable height on the legs (+/- 25 mm).
Sink drain valve 1½ ″.
Dimensions of sinks 60x50x30cm.
With upturned rear edge and base shelf.
Insoles with adjustable height (+/- 25 mm).
Sink drain valve 1½ ″.
Dimensions of sink 60x50x30cm.
With upturned back edge and base shelf.
Insoles with adjustable height (+/- 25 mm).
Sink drain valve 1½ ″.
Basin welded, made of AISI 304 stainless steel for high resistance to food acids and chemicals.
Embossed area – drop towards the trap, envelope-shaped.
Drain compatible with standard traps: ø50 mm.
40 mm backsplash to prevent water from flowing out.
Framework and body made of standard AISI 430, dimensions 40x40 mm.
Basin table front cover – made of AISI 430 steel.
Welded for high durability and stability.
Adjustable feet: +25/-5 mm.
Tap opening: ø30 mm.
Basin welded, made of AISI 304 stainless steel for high resistance to food acids and chemicals.
Embossed area – drop towards the trap, envelope-shaped.
Drain compatible with standard traps: ø50 mm.
40 mm backsplash to prevent water from flowing out.
Framework and body made of standard AISI 430, dimensions 40x40 mm.
Basin table front cover – made of AISI 430 steel.
Welded for high durability and stability.
Adjustable feet: +25/-5 mm.
Tap opening: ø30 mm.
Sink and worktop made of AISI 304 acid resistant stainless steel.
400x400x(H)250mm sink.
Adjustable feet on square profile.
With a 40mm backsplash – to maintain hygiene.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink and worktop made of AISI 304 acid resistant stainless steel.
400x400x(H)250mm sink.
Adjustable feet on square profile.
With a 40mm backsplash – to maintain hygiene.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink and worktop made of AISI 304 acid resistant stainless steel.
400x400x(H)250mm sink.
Adjustable feet on square profile.
With a 40mm backsplash – to maintain hygiene.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Made of durable stainless steel (AISI 304).
Welded sink.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
With a 40mm upstand.
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Made of durable stainless steel (AISI 304).
Welded sink.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
With a 40mm upstand.
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Basin made of stainless steel (AISI 304), frame made of stainless steel (AISI 430).
Basin depth: 300 mm.
Embossed area – water flow towards the sink, envelope-shaped.
With a 40mm upstand.
Distance from the upstand to the basin: 100 mm.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Flat pack delivery for self-assembly (wrench included).
Basin made of stainless steel (AISI 304), frame made of stainless steel (AISI 430).
Basin depth: 300 mm.
Embossed area – water flow towards the sink, envelope-shaped.
With a 40mm upstand.
Distance from the upstand to the basin: 100 mm.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Flat pack delivery for self-assembly (wrench included).
Hinged doors, hinges on the left.
Doors are kept shut with magnetic latches.
Hinged doors, hinges on the left.
Doors are kept shut with magnetic latches.
Sink and worktop made of acid resistant stainless steel AISI 304 .
Top with a 10mm recess in the front and at the sides.
400x400x(H)250mm sink.
Adjustable feet on square profile.
Worktop and shelf reinforced with a steel profile.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink and worktop made of acid resistant stainless steel AISI 304 .
Top with a 10mm recess in the front and at the sides.
400x400x(H)250mm sink.
Adjustable feet on square profile.
Worktop and shelf reinforced with a steel profile.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink and worktop made of acid resistant stainless steel AISI 304 .
Top with a 10mm recess in the front and at the sides.
400x400x(H)250mm sink.
Adjustable feet on square profile.
Worktop and shelf reinforced with a steel profile.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink and worktop made of acid resistant stainless steel AISI 304 .
Top with a 10mm recess in the front and at the sides.
400x400x(H)250mm sink.
Adjustable feet on square profile.
Worktop and shelf reinforced with a steel profile.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink and worktop made of acid resistant stainless steel AISI 304 .
Top with a 10mm recess in the front and at the sides.
400x400x(H)250mm sink.
Adjustable feet on square profile.
Worktop and shelf reinforced with a steel profile.
ø30mm opening for Hendi 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Sink bowls and worktop Made of durable stainless steel (AISI 304), frame Made of high quality stainless steel (AISI 430).
Sink is formed from a single piece and measures 400x400x(H)250 mm.
Shelf mounted at 160 mm from the floor, leaving plenty of space for larger appliances and boxes.
With a 40mm upstand.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
Maximum spread load capacity for worktop and shelf: 70 kg/m².
ø35mm opening for tap instalment, fits HENDI 970522 tap.
ø52mm drain compatible with standard traps.
Sink bowls and worktop Made of durable stainless steel (AISI 304), frame Made of high quality stainless steel (AISI 430).
Sink is formed from a single piece and measures 400x400x(H)250 mm.
Shelf mounted at 160 mm from the floor, leaving plenty of space for larger appliances and boxes.
With a 40mm upstand.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
Maximum spread load capacity for worktop and shelf: 70 kg/m².
ø35mm opening for tap instalment, fits HENDI 970522 tap.
ø52mm drain compatible with standard traps.
Made of durable stainless steel (AISI 304), front cover made of stainless steel (AISI 430).
Welded sink.
Worktop has a spread load capacity of 70 kg/m².
With a 40mm upstand.
Rear legs are placed 100 mm inside the table to facilitate wall-mounting.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Made of durable stainless steel (AISI 304), front cover made of stainless steel (AISI 430).
Welded sink.
Worktop has a spread load capacity of 70 kg/m².
With a 40mm upstand.
Rear legs are placed 100 mm inside the table to facilitate wall-mounting.
The legs are adjustable in height to guarantee level installment (+25/-5 mm).
ø30mm opening for tap instalment, fits HENDI 970515 and 970508 taps.
ø52mm drain compatible with standard traps.
Hinged door cabinet, hinges on the left.
Doors are kept shut with magnetic latches.
Hinged door cabinet, hinges on the left.
Doors are kept shut with magnetic latches.
Approximate maximum load per worktop – 70 kg/m².
400x400x(H)250 mm sink.
Dimensions: 1000x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 400 x 400 x 250 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1000x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 400 x 500 x 250 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1200x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 400 x 250 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1200x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 500 x 300 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1400x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 400 x 250 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1400x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 600 x 500 x 300 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1600x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
1 sink on the left and 1 storage space on the right .
Work surface thickness 40 mm.
Overflow is included in the set.
Dimensions of sink 500 x 400 x 250 mm.
Dimensions of drain Ø 50 mm.
Dimensions: 1600x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel worktop.
1 sink on the left 1 storage space on the right.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
Dimensions of the sink 600 x 500 x 300 mm.
Dimensions of the drain Ø 50 mm.
Dimensions: 1600x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
1 sink on the right and 1 storage space on the left .
Work surface thickness 40 mm.
Overflow is included in the set.
Dimensions of sink 500 x 400 x 250 mm.
Dimensions of drain Ø 50 mm.
Dimensions: 1600x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
1 sink on the right and 1 storage space on the left .
Work surface thickness 40 mm.
Overflow is included in the set.
Dimensions of sink 600 x 500 x 300 mm.
Dimensions of drain Ø 50 mm.
Dimensions: 1600x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 400 x 250 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1600x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double wall stainless steel worktop.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 500 x 300 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1800x700x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 400 x 500 x 250 mm.
The dimensions of the drain are Ø 50 mm.
Dimensions: 1800x600x870+100 mm.
Rounded corners.
Stainless steel legs with adjustable height (40x40mm).
Double-wall stainless steel work surface.
2 sinks.
The thickness of the work surface is 40 mm.
The overflow is included in the set.
The dimensions of the sink are 500 x 400 x 250 mm.
The dimensions of the drain are Ø 50 mm.
With turned up back edge and base shelf.
Insoles with adjustable height on the feet (+/- 25 mm).
Sink drain valve 1½ ″.
With turned up back edge and base shelf.
Insoles with adjustable height on the feet (+/- 25 mm).
Sink drain valve 1½ ″.
With turned up back edge and base shelf.
Insoles with adjustable height on the feet (+/- 25 mm).
Sink drain valve 1½ ″.
With turned up back edge and base shelf.
Insoles with adjustable height on the feet (+/- 25 mm).
Sink drain valve 1½ ″.
With turned up back edge and base shelf.
Insoles with adjustable height on the feet (+/- 25 mm).
Sink drain valve 1½ ″.